Skip to content

Off Tube

“Off Tube” is when commentary for an event is provided by the commentary team just watching the televised pictures. While commentators almost always have a picture monitor (or “tube”) regardless of their location, there is great advantage to be had from also being in a position to see the proceedings with their own eyes, and…

Read More...

Electret wiring

Electret personal microphones are all unbalanced. They all need a screen, both for the cable and for the grille and casing around the capsule. This usually gets connected to 0V. The electronics inside the capsule will have two external connections. One connection always needs to be kept more +ve than the other but it makes…

Read More...

Cross Point

A Cross Point is a notional intersection between an input and an output in a Matrix, which may be represented graphically by a cross-hatch of horizontal and vertical lines. Usually the horizontal lines represent the inputs and the vertical lines the outputs, and a cross overlaid at an intersection indicates a connection – a “cross…

Read More...

Boom

Boom is defined in the Concise Oxford English Dictionary as “a movable arm carrying a microphone or film camera” and in Collins Concise as “a pole carrying an overhead microphone and projected over a film or television set“. In sound studios a boom is either an arm fixed to a floor-mounted microphone stand or a…

Read More...

Foldback

Foldback is a feed of audio to the studio, via either loudspeaker, headphone or earpiece (IEM). It may be to provide the presenter and/or performers with a Cue feed from an external source or from a singer’s Microphone, to reinforce a singer’s voice for confidence or as an aid to tuning, or to provide actors…

Read More...

Cue

A “Cue” may be visual or aural. In television it is usual for somebody in the studio to be given a visual cue to begin by a wave from the Floor Manager, and also sometimes to conclude by “winding up” gestures (which become more frantic as time runs out!). In radio a cue light is…

Read More...

Bright Eyes (Phantom checker)

This “Bright Eyes” device was described by Hugh Robjohns in this Line Up article (June/July 2006) and uses a circuit designed by Chris Woolf. A Bright Eyes can be a very useful tool to have during rigging or fault finding to check if an XLR cable has active microphone powering. It is simple to construct…

Read More...

Pre-Fade Listen (PFL)

PFL usually stands for “Pre-Fader Listen”. PFL is a combined channel and monitoring function. On an analogue mixer with PFL, each channel has a switch which can connect the channel signal path, at a point just before the fader, to the pre-fade bus. This bus is picked up in the monitor module and made available as an…

Read More...

Optimising Windows or Mac computers for audio

Problems are usually bus and/or buffer overload. As Macs and PCs now share the same Intel chipsets, hopefully the “rules” that you have to apply to optimise a PC for audio will be similar. Basically the machine needs to be focussed entirely on handling audio and minimising system interrupts on its data buses. While the…

Read More...

Sound Levels

Sound Pressure Levels Our ears respond to fluctuations in the steady atmospheric pressure, so when measuring sound, that is what we usually measure. Sound pressure levels (or Sound Levels for short) are specified in Decibels, relative to a reference pressure of 20 micropascals. This reference pressure of 20 micropascals is nominally equal to the threshold…

Read More...
Scroll To Top