Metadata is literally data about data. In its simplest form it could be a note attached to an item of recording medium (e.g. a tape or disc) telling the user what is on the medium, how long it is and where and when it was recorded. More practically it will be digital information embedded in…

Microphones work by sensing minute changes in air pressure. Pressure A pressure operated microphone is essentially a sensitive barometer and reacts only to changes in pressure irrespective of the direction of the sound source. It comprises a sealed box with air inside and a thin diaphragm that deflects for small pressure changes. Some form of…

Mix Minus describes the arrangements used when a broadcast studio is connected to an external site such as an Outside Broadcast as a contribution or another studio which is simultaneously broadcasting the same programme in another region, two way working. In both cases the remote source needs a feed of the programme but not of…

Noisy Floors can be the bane of a Sound Recordists life. There are two main problems; noise from things like heels hitting a hard and hollow floor and noise from the floor itself as objects move over the surface. Heels and Legs High heels and chair legs can easily produce enough noise to drown out…

“Off Tube” is when commentary for an event is provided by the commentary team just watching the televised pictures. While commentators almost always have a picture monitor (or “tube”) regardless of their location, there is great advantage to be had from also being in a position to see the proceedings with their own eyes, and…

Ohms are a measure of the resistance to a flow of current. The name derives from the German physicist Georg Simon Ohm (1759-1854). The symbol for the ohm is the Greek capital letter omega. If the Greek letter cannot be used, the word ohm is used instead. In a simple circuit the relationship between the…

Problems are usually bus and/or buffer overload. As Macs and PCs now share the same Intel chipsets, hopefully the “rules” that you have to apply to optimise a PC for audio will be similar. Basically the machine needs to be focussed entirely on handling audio and minimising system interrupts on its data buses. While the…

Panpot is an abbreviation of Panoramic Potentiometer, a device used in Stereo mixers to vary the signal levels sent to the outputs from a Mono input, and thus apparently move the sound across the “sound stage” between left and right.

Phantom Power is a means of powering condenser microphones remotely, using balanced microphone cable. The AES (and IEC 61938) endorses two voltage levels, 48 V and 12 V, and they are referred to as P48 and P12

The Polar Pattern of a Microphone describes its directional sensitivity. The main family of patterns is a continuous spectrum between omni and bi-directional (figure-of-eight). Thus their titles are somewhat arbitrary, often overlap and, perversely, in most cases they are best defined by their ability to reject sound. Polar Patterns are generalised – they give an…